TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 643 of 1390

TM 9-2320-328-13&P-2

0197-3

DRAFT

0197

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.

Remove two screws (16) and swivel base (17) from pressure governor control (4).

END OF TASK

INSTALLATION

NOTE

Perform Steps (1) through (4) if pressure governor control base was removed.

1.

Install swivel base (17) on pressure governor control (4) with two screws (16).

2.

Install pressure governor control base (8) on center panel (11) with three screws (15), washers (14), and

locknuts (13).

3.

Install center panel (11) on vehicle with six screws (12).

4.

Install three screws (9) on panel (10) and center panel (11).

HWT2798