TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 649 of 1390

TM 9-2320-328-13&P-2

0200-1

DRAFT

0200

FIELD LEVEL MAINTENANCE

CAB WATER AND/OR FOAM LEVEL GAUGE(S) REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Water and foam level gauges are removed the same way.

Water level gauge shown.

•

Note orientation of gauge prior to removal to ensure proper installation.

1.

Disconnect water level gauge connector (1) from cab pump control wire harness connector (2).

NOTE

Nut and lockwasher remains attached to wires on water level gauge.

2.

Remove nut (3) and lockwasher (4) from water level gauge (5).

3.

Remove water level gauge (5) from instrument panel B (6).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2908

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

References

WP 0391, Fig. 26

Equipment Conditions

Cab instrument panel B removed (WP 0205)