TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 613 of 1390

TM 9-2320-328-13&P-2

0193-5

DRAFT

0193

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

•

Water tank weighs 2500 lb. (1135 kg).

Do not attempt to move or lift water tank

without the aid of three assistants and a suitable lifting device.

Failure to comply

may result in serious injury to personnel or damage to equipment.

•

Do not stand between water tank cradle and water tank or under water tank when

removing from vehicle.

Water tank may swing toward vehicle or fall causing injury

or death to personnel.

•

All personnel must stand clear during lifting operations.

A swinging or shifting load

may cause death or injury to personnel.

CAUTION

Water tank must be placed on four jack stands placed at four corners of water tank.

Failure to comply may cause damage to equipment.

NOTE

•

Use tiedown straps as needed to guide water tank during removal.

•

Two tiedown straps are attached to rear manual bray dump valve.

7.

With the aid of two assistants guiding water tank (12) with tie down straps, an assistant guiding from front of

water tank (12), and using a suitable lifting device, remove water tank (12) from vehicle and set water

tank (12) on four jackstands.

HWT3022

WARNING

ICON 07, 10, 11