TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 916 of 1390

TM 9-2320-328-13&P-2

0257-4

DRAFT

0257

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.

Remove two screws (12) and pump operator’s panel headset jack connector (13) from pump operator’s

panel (14).

END OF TASK

INSTALLATION

NOTE

•

Route intercom cables as noted prior to removal.

•

Install cable ties, split loom, and cushion clips as noted prior to removal.

•

Perform Step (1) through (4) if pump operator’s panel headset jack and pump operator’s

panel intercom cable needs to be installed.

1.

Install pump operator’s panel headset jack connector (13) on pump operator’s panel (14) with two

screws (12).

HWT2014A