TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 917 of 1390

TM 9-2320-328-13&P-2

0257-5

DRAFT

0257

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Carefully position pump operator’s panel intercom cable (11) on vehicle.

3.

Connect pump operator’s panel headset jack connector (10) on intercom cable connector (9).

4.

Close pump operator’s panel (WP 0207).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (5) through (8) if headset jack and passenger side intercom cable were

removed.

5.

Install headset jack (5) on cab roof (8) with four screws (7).

6.

Carefully install intercom cable (6) on vehicle.

7.

Connect intercom cable connector (4) on headset jack (5).

HWT2919

HWT2718