TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 926 of 1390

TM 9-2320-328-13&P-2

0260-2

DRAFT

0260

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Open SINCGARS door (9) (WP 0008).

4.

Disconnect power cable (10) from SINCGARS connector (11).

5.

Remove power cable (10) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Route power cable assembly as noted prior to removal.

•

Install cable ties and cushion clips as required.

1.

Install power cable (10) on vehicle.

2.

Connect power cable (10) on SINCGARS connector (11).

3.

Close SINCGARS door (9) (WP 0008).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2378