TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 935 of 1390

TM 9-2320-328-13&P-2

0264-1

DRAFT

0264

FIELD LEVEL MAINTENANCE

PUMP HOUSE POWER DISTRIBUTION BOX REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Tag and mark connectors and wires prior to removal to ensure proper installation.

1.

Disconnect pump house wire harness connector (1) from pump house power distribution box connector

DP2 (2).

2.

Disconnect pump house wire harness connector (3) from pump house power distribution box connector DP1

(4).

3.

Remove nut (5), lockwasher (6), and power wire (7) from stud (8).

Discard lockwasher.

4.

Remove nut (9), lockwasher (10), and ground wire (11) from stud (12).

Discard lockwasher.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2808

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Lockwasher (2)

Lockwasher (4)

Lockwasher (4)

References

WP 0241

WP 0270

WP 0299

WP 0391, Fig. 42

Equipment Conditions

Pump house panel K removed (WP 0339)