TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 936 of 1390

TM 9-2320-328-13&P-2

0264-2

DRAFT

0264

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove four nuts (13), lockwashers (14), eight washers (15), four screws (16), and power distribution

box (17) from bracket (18).

Discard lockwashers.

NOTE

Perform Steps (6) and (7) if pass-through terminal blocks and pump house power

distribution wire harness and block needs to be removed from power distribution box.

6.

Remove pump house power distribution wire harness and block (WP 0299).

7.

Remove two pass-through terminal blocks (WP 0241).

NOTE

Perform Steps (8) and (9) if bracket needs to be removed.

8.

Remove shutoff control valve manifold (WP 0270).

HWT2809