TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 135 of 844

TM 9-2320-328-13&P-3

0341-1

DRAFT

0341

Change 1

FIELD LEVEL MAINTENANCE

PUMP HOUSE FRAME REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

All pump house frame members are removed the same way.

Number of fasteners per

member vary with the number of attached components.

•

Equipment conditions will vary depending on the member being removed.

•

Remove split loom, cushion clips, and cable ties as required.

•

Passenger side rear frame support shown.

1.

Remove pump house panels H (1), O (2), and M (3) from vehicle (WP 0339).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3425

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Ties, Cable, Plastic

(WP 0400, Item 26) (if required)

Lockwasher (5)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

(Number of personnel required will vary with

member being replaced)

References

WP 0391, Fig. 70

Equipment Conditions

Pump hose panels removed (WP 0339) (Panels

will vary with member being replaced)