TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 134 of 844

TM 9-2320-328-13&P-3

0340-26

DRAFT

0340

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Both electrical valve control meters are installed the same way.

Passenger side discharge

electric valve control meter shown.

•

Install cable ties as required.

37. Connect flow sensor wire harness connector (6) on electric valve control meter flow sensor connector (5).

38. Connect pressure transducer wire harness connector (4) on electric valve control meter pressure transducer

connector (3).

39. Connect valve control wire harness connector (2) on electric valve control meter motor connector (1).

40. Repeat Steps (37) through (39) for driver side discharge electric valve control meter.

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Close pump operator’s panel (WP 0207)

2.

Install battery box (WP 0238)

3.

Install pump house panels L, K, H, G, E, B, and A (WP 0339)

4.

Install power take off (PTO) drive shaft (WP 0154)

5.

Fill hydraulic reservoir (WP 0145)

END OF TASK

END OF WORK PACKAGE

HWT2968