TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 124 of 844

TM 9-2320-328-13&P-3

0340-16

DRAFT

0340

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Pump house assembly is VERY heavy.

Do not attempt to lift or move pump house

assembly without the aid of three assistants and a suitable lifting device. Use

extreme caution when lifting or moving pump house assembly.

Failure to comply

may result in damage to equipment and/or death or injury to personnel.

CAUTION

Care must be taken when installing hoses and wires through pump house panel N

and pump operator’s panel N.

Failure to comply may result in damage to

equipment.

NOTE

•

Install cable ties, split loom, and cushion clips as required.

•

Route hoses and wires as noted.

6.

With the aid of three assistants, attach a suitable lifting device to three lift points (85) on pump house

frame (84) and carefully install pump house assembly (86) on vehicle.

HWT2304A

WARNING

ICON 8,9,10,11