TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 123 of 844

TM 9-2320-328-13&P-3

0340-15

DRAFT

0340

INSTALLATION

NOTE

Install mounting brackets in same orientation as noted prior to removal.

1.

Install driver side rear pump house mounting bracket (83) on vehicle with three screws (102) and

locknuts (101).

2.

Install passenger side rear pump house mounting bracket (83) and shim plate (100) on vehicle with four

screws (99) and locknuts (98).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Install passenger side front pump house mounting bracket (83), tie down bracket (97), and bracket (96) on

vehicle with four screws (95) and locknuts (94).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Install driver side front pump house mounting bracket (83), tie down bracket (93), and wire harness

bracket (90) on vehicle with four screws (92) and locknuts (91).

5.

Install cushion clip (89) on wire harness bracket (90) with screw (88) and locknut (87).

HWT2306A

HWT2305A