TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 120 of 844

TM 9-2320-328-13&P-3

0340-12

DRAFT

0340

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Pump house assembly is VERY heavy.

Do not attempt to lift or move pump house

assembly without the aid of three assistants and a suitable lifting device. Use

extreme caution when lifting or moving pump house assembly.

Failure to comply

may result in damage to equipment and/or death or injury to personnel.

CAUTION

Care must be taken when removing hoses and wires from pump operator’s panel

housing and through pump house panel N.

Failure to comply may cause damage to

equipment.

NOTE

•

Note position and remove split loom, cushion clips, and cable ties as required.

•

Note routing of wires and hoses prior to removal to ensure proper installation.

36. With the aid of three assistants, attach a suitable lifting device to three lift points (85) on pump house

frame (84) and carefully remove pump house assembly (86) from vehicle.

HWT2304A

WARNING

ICON 8,9,10,11