TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 110 of 844

TM 9-2320-328-13&P-3

0340-2

DRAFT

0340

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark connectors prior to removal to ensure proper installation.

•

Remove cable ties as required.

•

Both electric valve control meters are removed the same way.

Passenger side discharge

electric valve control meter shown.

1.

Disconnect electric valve control meter valve motor connector (1) from valve control wire harness

connector (2).

2.

Disconnect electric valve control meter pressure transducer connector (3) from pressure transducer wire

harness connector (4).

3.

Disconnect electric valve control meter flow sensor connector (5) from flow sensor wire harness connector (6).

4.

Repeat Steps (1) through (3) for driver side discharge electric valve control meter.

HWT2968