TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 119 of 844

TM 9-2320-328-13&P-3

0340-11

DRAFT

0340

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

34. Remove coupling (77) and main inlet pipe (75) from vehicle (WP 0313).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Note position of isolators and snubbing washers prior to removal to ensure proper

installation.

•

All four pump house mounting brackets are removed the same way.

Passenger side front

bracket shown.

•

Number of snubbing washers may vary.

35. Remove four nuts (78), eight washers (79), four screws (80), 12 snubbing washers (81), and eight

isolators (82) from four pump house mounting brackets (83) and pump house frame (84).

HWT2302A

HWT2303A