TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 142 of 844

TM 9-2320-328-13&P-3

0342-4

DRAFT

0342

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark hoses prior to removal to ensure proper installation.

•

Cap and plug hoses upon removal.

10. Remove hose 1682914 (17) and preformed packing (18) from elbow (19).

Discard preformed packing.

11. Remove hose 1682914 (20) and preformed packing (21) from elbow (22).

Discard preformed packing.

12. Remove hose 1682914 (23) and preformed packing (24) from elbow (25).

Discard preformed packing.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

13. Remove four screws (26), lockwashers (27), washers (28), and two wire-routing trim plates (29) from pump

operator’s panel housing (30).

Discard lockwashers.

HWT3027

HWT3028