TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 366 of 844

TM 9-2320-328-13&P-3

0381-2

DRAFT

0381

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

1.

Apply sealing compound to threads of two fittings (8), (9), and plugs (10).

2.

Install two plugs (10) on test panel (5).

3.

Install two fittings (9) and (8) on test gauge panel (5).

4.

Position test gauge panel (5) on vehicle.

NOTE

Install cable ties as required.

5.

Install two air lines (7) and (6) on fittings (9) and (8).

6.

Install bracket (4) on test gauge panel (5) with washer (3), lockwasher (2), and screw (1).

END OF TASK

FOLLOW-ON MAINTENANCE

Install pump house panel K (WP 0339)

END OF TASK

END OF WORK PACKAGE

HWT0507

WARNING

ICON 30, 44, 27