TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 362 of 844

TM 9-2320-328-13&P-3

0380-2

DRAFT

0380

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Wires are attached to siren control.

Only remove siren control enough to access wires.

3.

Remove two screws (5), lockwashers (6), washers (7), and siren control (8) from cab instrument panel B (9).

Discard lockwashers.

NOTE

Tag and mark wires prior to removal to ensure proper installation.

4.

Disconnect siren control connector (10) from cab power distribution wire harness connector (11).

5.

Loosen screw (12) and remove wire 1637 (13) from siren control terminal S-1 (14).

HWT2567

HWT2568