TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 354 of 844

TM 9-2320-328-13&P-3

0379-2

DRAFT

0379

DISASSEMBLY

NOTE

•

Note position of elbows and fittings prior to removal to ensure proper installation.

•

Tag and mark hoses prior to removal to ensure proper installation.

1.

Remove two hoses (1) and elbows (2) from air cylinder (3).

2.

Remove two hoses (4), elbow (5), fitting (6), two control valves (7), connector (8), and preformed packing (9)

from pattern sleeve (10).

Discard preformed packing.

3.

Remove three screws (11) and turret motor (12) from elbow (13).

4.

Remove four screws (14) and elbow (13) from mounting plate (15).

5.

Remove four screws (16) from two cylinder pivots (17) and reducer (18).

6.

Remove two cylinder pivots (17) and preformed packings (19) from air cylinder (3).

Discard preformed

packings.

7.

Remove air cylinder eye (3) from cylinder eye (20).

HWT2410