TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 347 of 844

TM 9-2320-328-13&P-3

0377-5

DRAFT

0377

ASSEMBLY

1.

Install fitting (6) on junction box (8) with nut (34).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

2.

Apply sealant to junction box wire harness connector (33).

3.

Install junction box wire harness connector (33) and retainer (32) on junction box (8) with four screws (31).

4.

Install terminal block (16) on junction box (8) with two screws (30).

5.

Install nine wires (29) on terminal block (16) with nine screws (28).

6.

Install four jumpers (27) on terminal block (13).

7.

Install terminal block (13) on junction box (8) with two screws (26).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

WARNING

ICON 30, 44, 27