TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 355 of 844

TM 9-2320-328-13&P-3

0379-3

DRAFT

0379

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.

Remove screw (21), preformed packing (22), and outlet tee (23) from reducer (18).

Discard preformed

packing.

9.

Remove two preformed packings (24) from outlet tee (23).

Discard preformed packings.

10. Remove setscrew (25) from cylinder eye (20).

11. Remove pin (26) and cylinder eye (20) from outlet tee (23).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Wear safety goggles and use care when removing retaining rings.

Retaining rings

are under tension and can act as projectiles when released causing injury to

personnel.

12. Remove retaining ring (27) and pattern sleeve (10) from outlet tee (23).

NOTE

Note position of preformed packing prior to removal to ensure proper installation.

13. Remove and discard preformed packing (28) from pattern sleeve (10).

14. Remove and discard preformed packing (29) from outlet tee (23).

HWT2411

WARNING

ICON 26