TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 359 of 844

TM 9-2320-328-13&P-3

0379-7

DRAFT

0379

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Install baffle (38) on outlet tee (23) with screw (37).

5.

Install two preformed packings (36) and (35) on piston (34).

6.

Install piston (34) on outlet tee (23).

7.

Install two preformed packings (33) and (32) on piston (31).

8.

Install piston (31) on outlet tee (23).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Wear safety goggles and use care when installing retaining rings.

Retaining rings

are under tension and can act as projectiles when released causing injury to

personnel.

9.

Install retaining ring (30) on outlet tee (23).

10. Install preformed packing (29) on outlet tee (23).

11. Install preformed packing (28) on pattern sleeve (10).

12. Install pattern sleeve (10) on outlet tee (23) with retaining ring (27).

13. Install cylinder eye (20) on outlet tee (23) with pin (26).

14. Install setscrew (25) on cylinder eye (20).

15. Install two preformed packings (24) on outlet tee (23).

16. Install outlet tee (23) on reducer (18) with preformed packing (22) and screw (21).

HWT2411

WARNING

ICON 26