TM-9-2320-341-10
TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-341-10 - Page 265 of 962
•
Never operate vehicle with one or more ball valves positioned OFF.
Failure to comply may result in damage to equipment.
NOTE
•
Vehicle is equipped with four ball valves, one on top of each air spring
on No. 1 and No. 4 axles. Each ball valve controls two air springs
(zone).
•
No. 1 axle driver side ball valve controls both No. 1 and No. 2 axle
air springs (zone) for that side of vehicle.
•
No. 1 axle passenger side ball valve controls both No. 1 and No. 2
axle air springs (zone) for that side of vehicle.
•
No. 4 axle driver side ball valve controls both No. 4 and No. 3 axle
air springs (zone) for that side of vehicle.
•
No. 4 axle passenger side ball valve controls both No. 4 and No. 3
axle air springs (zone) for that side of vehicle.
1.
Position ball valve (1) OFF (shown):
a.
Pull lock (2) towards handle (3) and push handle (3) until at 90 degree angle with
ball valve (1).
TM 9-2320-341-10
0040
0040-3
Back to Top
