TM-9-2320-341-10
TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-341-10 - Page 306 of 962
7.
When equipment is fully loaded, pull remote-control unit winch control lever (3).
NOTE
If high idle was not utilized during winch cable pay out, skip Step (8).
8.
Set remote-control unit HIGH IDLE switch (4) to OFF position (as applicable).
DISCONNECT WINCH CABLE AND STOW
1.
Ensure Cable Hold Down control (1) is engaged (pushed in).
4
5
2
7
6
8
1
3
Figure 10.
2.
Disconnect winch cable (2) from equipment.
TM 9-2320-341-10
0042
0042-12
Back to Top
