TM-9-2320-341-10

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

  TM-9-2320-341-10 - Page 315 of 962

Table 1.
Lockout Requirements. - Continued
SEMITRAILER CENTER OF GRAVITY
(CG)
ON-ROAD
OFF-ROAD
HALF
LOCK
HALF LOCK
FULL LOCK
NO LOCK
NO LOCK
FULL LOCK
Figure 1.
NOTE
If lockout assembly is oriented correctly (refer to table 1), skip to Step
(4).
Remove lockout assembly only if desired lockring position (HALF
LOCK or FULL LOCK) is not located to the inside (against the fifth
wheel).
To remove lockout assembly, complete Step (2).
Loosen and rotate lockring if NO LOCK position is desired, or if
desired lockring position (HALF LOCK or FULL LOCK) is located to
the inside (against the fifth wheel).
To loosen and rotate lockout assembly, skip to Step (3).
Both fifth wheel lockout assemblies are removed the same way
(driver side shown).
2.
Remove fifth wheel lockout assembly and orient correctly:
TM 9-2320-341-10
0043
0043-3


Back to Top