TM-9-2320-341-10

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-341-10 - Page 512 of 962

9

12

M977 SHOWN

Figure 6.

16. Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.

17. Remove quick release pin (16) and guide bracket (17). Move cable guide brackets (18)

apart so cable (9) can be placed against bottom of sheave (19).

18. Move cable guide brackets (18) together and install guide bracket (17) and quick

release pin (16).

19. Set PTO ENGAGE switch (2) to ON position. Indicator light (3) will illuminate.

20. Move winch shift lever (4) to OUT and pay out winch cable (9) while assistant pulls cable

to tree, another heavy vehicle (WP 0086), or another heavy object refer to FM 4-30.31.

(WP 0146)

21. When winch cable (9) is let out to heavy object, release winch shift lever (4) to center

position.

22. Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.

23. If snatch block must be used for self-recovery operation, attach self-recovery winch

cable (9) to snatch block (WP 0085) and connect end of self-recovery winch cable to

mired vehicle left front towing eye. (WP 0086) Attach snatch block to tree, another

vehicle, or heavy object refer to FM 4-30.31. (WP 0146)

TM 9-2320-341-10

0084

0084-6