21
22
21
9
20
M977 SHOWN
13
Figure 8.
58. Lift winch cable (9) out of tensioning device pulleys (21).
59. Release tension pulley lever (20).
60. Pull winch cable (9) back and out of cable guide (13).
61. While assistant guides winch cable (9), move winch shift lever (4) to IN.
62. When clevis (7) is approximately 2 ft. (61 cm) from winch (10), release winch shift lever
(4) to center position.
63. Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.
64. Assistant routes end of winch cable (9) down along front face of winch (10).
TM 9-2320-341-10
0084
0084-11