TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 704 of 1184

27. Set transmission range selector (8) to R (reverse), back up vehicle, and stop when 6 to

8 in. (15.24 to 20.32 cm) of clearance exist between bridge bay bow point and the closer

part of BAP rear rollers (bumper or rear rollers) or vehicle pintle hook assembly.

NOTE

Dashboard parking brake indicator will illuminate when PARKING

BRAKE control is applied.

28. Pull out PARKING BRAKE control (7).

29. Set transmission range selector (8) to N (neutral).

30. Attach sling hooks to bow lifting eyes, making sure sling cable lengths are as follows:

a.

Interior bay - four short sling cable lengths connected to bridge bay.

b.

Ramp bay - two long sling cable lengths connected at ramp end and two short sling

cable lengths connected to other end.

31. Set HIGH IDLE switch (19) to ON position.