TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 707 of 1184

48. Position MAIN FRAME switch (22) to load and stop when large ring of bay sling is about

9 ft. (2.7 m) above high-bank ground.

49. Position HIGH IDLE switch (19) to OFF position.

WARNING

Releasing travel latch will cause bridge bay to unfold, causing injury or

death to personnel and damage to equipment.

NOTE

Refer to TM 5-5420-209-12 for bridge bay operations.

50. Have boat crew release all bridge bay foldlock latches and all travel latches except one.

WARNING

Maintain at least two boat lengths from unfolding bridge bay. Failure to

comply may result in injury or death to personnel and damage to equip-

ment.

51. Have boat crew unfold bridge bay by completing the following procedures:

a.

Insert handle with lanyard into the one engaged bay travel latch.

b.

Keep free end of lanyard aboard boat.

c.

Move boats clear of area required for unfolding bridge bay.

d.

Pull lanyard to release bridge bay unfolding operation.

e.

Secure bridge bay to boat after unfolding.

NOTE

Dashboard parking brake indicator will go out when PARKING BRAKE

control is released.

52. Set transmission range selector (8) to N (neutral) and push in PARKING BRAKE control

(7).

TM 9-2320-346-10

0104

0104-17