TM 9-2320-361-10
2-21. RAISING WINDSHIELD AND INSTALLING CAB TOP
(Contd)
g.
Slide cover (9) into windshield channel (10).
h.
Pull cover (9) over windshield assembly (2) to meet crossbar (4).
i.
Slide cover (9) downward into channel in pillar posts (5).
j.
Secure cover (9) on 12 fastener studs (12) and fasten two snaps (11).
k.
Tie lashing rope (13) to side handles (15) and hooks (14) at rear of cab (6).
l.
To remove cover (9), reverse steps d. through k.
m.
Clean cover (9) (refer to para. 2-9), and stow cover (9), pillar posts (5),
crossbar (4), and side roof rails (8) behind cab seat.
2-91