TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 153 of 392

TM 9-2320-361-10

2-24. OPERATION OF FRONT WINCH (Contd)

b. Pulling Load.

WARNING

Ž

All personnel must stand clear during winching operations.

A snapped cable or shifting load may cause injury or death

to personnel.

Ž

When hooking up for winching operations, position throat

(open part) of hook upward in case overloading straight-

ens out hook. Failure to do this may result in injury or

death to personnel.

(1)

Fasten winch cable (2) to load (1) being pulled.

(2)

To pull an excessively heavy load (4), use a snatch block (3).

(3)

To pull load (5) that is not in a direct line, use snatch block (6) and utility.

chain (7) as shown.

NOTE

Perform step 4 if conditions permit. If not, go to step 5.

2-96