TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 151 of 392

TM 9-2320-361-10

2-24. OPERATION OF FRONT WINCH

WARNING

Be sure the front winch drive shaft shearpin is

aluminum. Do not substitute any other type metal pin

for the shearpin, or injury or death to personnel may

result.

CAUTION

Do not operate winch with less than four turns of cable

on drum. Failure ta do so may cause damage to winch.

a. Unwinding Winch Line.

(1)

Place vehicle so that winch (1) is in direct line with object (2) to be

winched.

(2)

Apply parking brake (4), and place transmission gearshift lever (3) and

transmission power takeoff lever (5) in NEUTRAL position with hinge lock (6)

closed.

2-94