TM 9-2320-361-20
14-35. SECONDARY HEATER FUEL LINES REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION
M109A3 and M185A3
Parking brake set (TM 9-2320-361-10).
MATERIALS/PARTS
GENERAL SAFETY INSTRUCTIONS
Antiseize tape (Appendix C, Item 27)
Diesel fuel is flammable. Do not perform this
REFERENCES (TM)
procedure near flames.
TM 9-2320-361-10
TM 9-2320-361-20P
a. Removal
WARNIN G
Diesel fuel is flammable. Do not perform fuel system procedures
near open flame. Injury or death to personnel may result.
NOTE
Have drainage container ready to catch coolant.
1. Remove tubing (3) from elbow (4) and tee (2).
2. Remove elbow (4) from nipple (5).
3. Remove tubing (1) from tee (2).
4. Remove tee (2) from van body wall (6).
NOTE
Wrap male pipe threads with antiseize tape prior to installation.
b. Installation
1. Install tee (2) on van body wall (6).
2. Install tubing (1) on tee (2).
3. Install elbow (4) on nipple (5).
4. Install tubing (3) on elbow (4) and tee (2).
14-55