TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 1065 of 1207
TM 9-2320-361-20
Section Ill. DEEP WATER FORDING KIT MAINTENANCE
14-37. DEEP WATER FORDING KIT MAINTENANCE INDEX
PARA.
NO.
TITLE
PAGE
NO.
14-38.
Air Intake Tubes Replacement
14-60
14-39.
Control Valve Replacement
14-62
14-40.
Regulator Valve Replacement
14-64
14-38. AIR INTAKE TUBES REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
Eight locknuts
Tiedown strap
TM 9-2320-361-20P
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
Hood raised and secured (TM 9-2320-361-10).
a. Removal
1. Loosen clamp (18) and remove air tube (19) from air cleaner (2).
2. Loosen three clamps (14) and remove hose (15), elbow (16), and hose (17) from crankcase breather
tube (13).
3. Loosen clamp (9) and remove hood (7) and sleeve (8) from air tube (19).
4. Remove four locknuts (12), screws (20), two retaining clamps (11), air tube (19), and hose (17) from
supports (10). Discard locknuts (12).
5. Remove four locknuts (22), two supports (10), U-bolt (23), and clamp half (24) from exhaust
pipe (21). Discard locknuts (22).
6. Remove tiedown strap (4), loosen two clamps (3), and remove hose (6) from air compressor (1),
steering column (5), and air cleaner (2). Discard tiedown strap (4).
1.
2.
3.
4.
5.
6.
7.
Install hose (6) on air cleaner (2) and air compressor (1). Tighten two clamps (3).
Install hose (6) on steering column (5) with new tiedown strap (4).
Install two supports (10) on exhaust pipe (21) with U-bolt (23), clamp half (24), and four new
locknuts (22).
Install hose (17), air tube (19), and two retaining clamps (11) on supports (10) with four screws (20)
and new locknuts (12).
Install hose (17), elbow (16), and hose (15) on crankcase breather tube (13). Tighten three
clamps (14).
Install air tube (19) through right side panel and on air cleaner (1) with clamp (18).
Install sleeve (8) and hood (7) on air tube (19). Tighten clamp (9).
14-60
Back to Top
