TM 9-2320-361-20
14-36. SECONDARY HEATER AND DUCT REPLACEMENT (Contd)
d. Heater, Exhaust Tube, and Guard Installation
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Install bracket (13) on van wall (37) with clamp (16), three washers (38), four new lockwashers (17),
and screws (18).
Install support (26) on bracket (13) with two washers (38), new lockwashers (17), screws (18),
washers (38), new lockwashers (17), and screws (39).
Install new gasket (27) and exhaust tube (28) on support (26) with four screws (28).
Install new gasket (36) and tube adapter (35) on van wall (37) with three lockwashers (32) and
screws (33).
Install exhaust tube (29) on tube adapter (35) with clamp (34).
Install guard (30) on exhaust tube (29), support (26), and tube adapter (35) with washer (31), new
lockwasher (32), and two screws (28) and (33).
Install new O-ring (24), washer (23), and heater (15) on support (26) with two clamps (14).
Install adapter (20) on heater (15) with eight screws (21).
Install duct (25) on adapter (20) with clamp (22).
Install heater harness (19) on heater (15).
14-59