TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 1099 of 1207
TM 9-2320-361-20
14-55. FIXED SEATBELT KIT REPLACEMENT
This task covers:
a. Removal of Driver’s Seatbelts
c. Removal of Companion Seatbelts
b. Installation of Driver’s Seatbelts
d. Installation of Companion Seatbelts
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
TMATERIALS/PARTS
TM 9-2320-361-20P
Twelve locknuts
EQUIPMENT CONDITION
PERSONNEL REQUIRED
Parking brake set (TM 9-2320-361-10).
Companion seat removed (para. 11-26).
Two
a. Removal of Driver’s Seatbelts
1. Pull driver’s seat (1) to full forward position.
2. Remove locknut (5), screw (2), two washers (3), and seatbelt (4) from back cab panel channel (6).
Discard locknut (5).
3. Remove locknut (8), washer (9), screw (25), seatbelt (7), and spacer (26) from back cab panel
channel (6). Discard locknut (8).
NOTE
Assistant will help with step 4.
4. Remove four locknuts (24), screws (10), and eight washers (11) from back cab panel channel (6).
Discard locknuts (24).
b. Installation of Driver’s Seatbelts
1. Install seatbelt (4) on back cab panel channel (6) with two washers (3), screw (2), and new
locknut (5).
2. Install spacer (26) and seatbelt (7) on back cab panel channel (6) with screw (25), washer (9), and
new locknut (8).
NOTE
Assistant will help with step 3.
3. Install eight washers (11), four screws (10), and new locknuts (24) on back cab panel channel (6).
c. Removal of Companion Seatbelts
1. Remove locknut (16), seatbelt (17), spacer (22), screw (12), and washer (13) from back cab panel
channel (6). Discard locknut (16).
2. Remove locknut (21), seatbelt (18), screw (19), and washer (20) from back cab panel channel (6).
Discard locknut (21).
NOTE
Assistant will help with step 3.
3. Remove four locknuts (23), screws (14), and eight washers (15) from back cab panel channel (6).
14-94
Back to Top
