TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 1095 of 1207

TM 9-2320-361-20

14-52. 100-AMP ALTERNATOR REGULATOR REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Eight lockwashers

EQUIPMENT CONDITION

Four locknuts

Parking brake set (TM 9-2320-361-10).

PERSONNEL REQUIRED

Hood raised and secured (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

Two

1. Diconnect cable (13) and harness (12) from regulator (11).

2. Remove four nuts (10), lockwashers (9), and regulator (11) from two mounts (3). Discard

lockwashers (9).

3. Remove four screws (2), lockwashers (1), and two brackets (8) from regualtor (11). Discard

lockwashers (1).

Assistant will help with step 4.

4. Remove four locknuts (6), washers (5), screws (7), and two mounts (3) from firewall (4). Discard

locknuts (6).

b. Installation

NOTE

Assistant will help with step 1.

1. Install two mounts (3) on firewall (4) with four screws (7), washers (5), and new locknuts (6).

2. Install two brackets (8) on regulator (11) with four new lockwashers (1) and screws (2).

3. Install regulator (11) on two mounts (3) with four new lockwashers (9) and nuts (10).

4. Connect cable (13) and harness (12) to regulator (11).

14-90