TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 1087 of 1207

TM 9-2320-361-20

14-47. FIRE EXTINGUISHER MOUNTING KIT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Four locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

1. Open two clamps (6), and remove fire extinguisher (8) from mounting bracket (7).

2. Remove four locknuts (3), screws (1), washers (2), and mounting bracket (7) from cab (4). Discard

locknuts (3).

1. Install mounting bracket (7) on cab (4) with four washers (2), screws (1), and new locknuts (3).

2. Install fire extinguisher (8) on mounting bracket (7) and close two clamps (6).

3. Tighten or loosen adjusting screws (5) to hold fire extinguisher (8) in place.

14-82