TM-9-2320-361-20

TM 9-2320-361-20

14-43. MACHINE GUN MOUNT KIT REPLACEMENT (Contd)

b. Disassembly

NOTE

Steps 1, 2, and 3 are identical for removing ammunition trays from

both front bracket post and left rear bracket post. This procedure is

for the front bracket post.

1. Remove two straps (6) from ammunition tray (7).

2. Remove four locknuts (1), washers (2), screws (4), and ammunition tray (7) from front bracket

post (11). Discard locknuts (1).

3. Remove four locknuts (9), washers (8), screws (10), and two tray brackets (3) from ammunition tray

extensions (5). Discard locknuts (9).

4. Remove four locknuts (17), screws (14), eight washers (15), and left rear adapter (16) from left rear

bracket post (18). Discard locknuts (17).

5. Remove two cotter pins (13) and straight pins (12) from right rear bracket post (19) and front

bracket post (11). Discard cotter pins (13).

c. Assembly

Install left rear adapter (16) on first four holes in left rear bracket post (18) with four screws (14),

eight washers (15), and four new locknuts (17). Finger tighten screws (14).

Install two straight pins (12) on front bracket post (11) and right rear bracket post (19) with two new

cotter pins (13).

NOTE

Steps 3, 4, and 5 are identical for assembling ammunition trays on

both front bracket post and left rear bracket post. This procedure is

for the front bracket post.

Install two tray brackets (3) on ammunition tray extensions (5) with four screws (10), washers (8),

and new locknuts (9).

Install ammunition tray (7) on front bracket post (11) with four screws (4), washers (2), and new

locknuts (1).

Install two straps (6) on ammunition tray (7).

14-72

TM-9-2320-361-20 - Page 1077 of 1207