TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 1075 of 1207
TM 9-2320-361-20
Section V. MOUNTING KIT MAINTENANCE
14-42. MOUNTING KITS MAINTENANCE INDEX
PARA.
TITLE
PAGE
NO.
NO.
14-43.
Machine Gun Mount Kit Replacement
14-70
14-44.
Rifle Mounting Kit Replacement
14-75
14-45.
Decontamination Mounting Kit Replacement
14-76
14-46.
Chemical Agent Alarm Mounting Kit Replacement
14-78
14-47.
Fire Extinguisher Mounting Kit Replacement
14-82
14-48.
Bumper Step Kit Replacement
14-84
14-43. MACHINE GUN MOUNT KIT REPLACEMENT
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
APPLICABLE MODELS
All
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
MATERIALS/PARTS
Cab top removed, hardtop (para. 14-14), or soft top
Thirty-two locknuts
(TM 9-2320-361-10) (task d. only).
Two cotter pins
GENERAL SAFETY INSTRUCTIONS
PERSONNEL REQUIRED
Bracket posts must be held in position before
Two
removing U-bolts.
REFERENCES (TM)
TM 9-2320-361-10
TM 9-2320-361-20P
Clamp down latch on ring mount to prevent rotation during removal.
1. Remove twelve locknuts (5), screws (2), and twenty-four washers (3) from ring mount (1),
adapter (4), front bracket post (6), and rear bracket posts (7) and (8). Discard locknuts (5).
NOTE
Assistant will help with steps 2 through 4.
2. Remove ring mount (1) from front bracket post (6), rear bracket posts (7) and (8), and adapter (4).
3. Loosen four screws (13) and remove front bracket post (6) from front gun mount bracket (11).
Retighten four screws (13).
WARNIN G
Bracket posts must be held in position before removing U-bolts.
Failure to do so may cause injury to personnel.
4. Remove eight locknuts (10), four U-bolts (9) and two rear bracket posts (7) and (8) from two rear gun
mount brackets (12). Discard locknuts (10).
14-70
Back to Top
