TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 1081 of 1207

TM 9-2320-361-20

14-45. DECONTAMINATION MOUNTING KIT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Parking brake set (TM 9-2320-361-10).

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

TM 3-4230-204-12&P

Decontamination apparatus removed

(TM 3-4230-204-12&P).

a. Removal

1. Slide boot (5) up gearshift lever (6).

2. Remove nut (4), screw (2), washer (1), and gearshift lever (6) from transmission stud shaft (3).

3. Remove thirteen screws (8) and intermediate tunnel (7) from cab floor (9).

4. Remove four nuts (12), capscrews (10), and mounting bracket (11) from intermediate tunnel (7).

b. Installation

1. Install mounting bracket (11) on intermediate tunnel (7) with four capscrews (10) and nuts (12).

2. Install intermediate tunnel (7) on cab floor (9) with thirteen screws (8).

3. Install gearshift lever (6) on transmission stud shaft (3) with washer (1), screw (2), and nut (4).

4. Slide boot (5) down over end of gearshift lever (6).

14-76