TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 1083 of 1207

TM 9-2320-361-20

14-46. CHEMICAL AGENT ALARM MOUNTING KIT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 3-6665-225-12

MATERIALS/PARTS

TM 9-2320-361-10

TM 9-2320-361-20P

Four tiedown straps (Appendix C, Item 20)

Six locknuts

EQUIPMENT CONDITION

PERSONNEL REQUIRED

Parking brake set (TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

Two

Battery ground cable disconnected (para. 4-48).

M43 detector and M42 alarm unit removed

(TM 3-6665-225-12).

1. Remove nut (3) and harness receptacle (5) from bracket (2).

2. Remove three locknuts (10), support (9), three screws (4), and detector unit bracket (1) from left

front fender (8). Discard locknuts (10).

3. Remove screw (6) and clamp (7) from front fender (8).

4. Disconnect wire (16) from connector (17).

5. Remove locknut (11), washer (12), screw (19), harness ground wire (18), ground strap (15), and

washer (14) from right side of turn signal flasher box (13). Discard locknut (11).

14-78