TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 1089 of 1207

TM 9-2320-361-20

14-48. BUMPER STEP KIT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

EQUIPMENT CONDITION

Two lockwashers

Four locknuts

Parking brake set (TM 9-2320-361-10).

1. Remove safety pin (8) from pin (11).

2. Remove pin (11) from bumper step (9) and bracket (3).

3. Remove S-hook (10) from bumper step (9).

4. Remove two locknuts (5), lockwashers (6), washers (7), screws (12), and bumper step (9) from

bracket (3). Discard lockwashers (6) and locknuts (5).

5. Remove two locknuts (2), screws (4), and bracket (3) from bumper (1). Discard locknuts (2).

b. Installation

1. Install bracket (3) on bumper (1) with two screws (4) and new locknuts (2).

2. Install bumper step (9) on bracket (3) with two screws (12), washers (7), new lockwashers (6),

and new locknuts (5).

3. Install S-hook (10) on bumper step (9).

4. Install pin (11) on bumper step (9) and bracket (3).

5. Install safety pin (8) in pin (11).

NOTE

Ensure step is in stowed position before truck is mobilized.

14-84