TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 333 of 1207

TM 9-2320-361-20

3-19. TURBOCHARGER OIL DRAIN TUBE, HOSE, AND ADAPTER REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Gasket

EQUIPMENT CONDITION

Two lockwashers

Parking brake set (TM 9-2320-361-10).

Antiseize tape (Appendix C, Item 27)

Hood raised and secured (TM 9-2320-361-10).

a. Removal

1. Remove two screws (7) and lockwashers (8) from breather tube (9), oil drain tube (2), and

turbocharger (1). Discard lockwashers (8).

2. Loosen two clamps (6) and remove oil drain tube (2) and gasket (10) from turbocharger (1) and

hose (4). Discard gasket (10).

3. Remove hose (4) and two clamps (6) from oil drain adapter (5).

4. Remove oil drain adapter (5) from engine (3).

NOTE

Male pipe threads must be wrapped with antiseize tape before installation.

1. Install oil drain adapter (5) on engine (3).

2. Install hose (4) and two clamps (6) on oil drain adapter (5). Do not tighten clamps (6).

3. Install oil drain tube (2) on hose (4).

4. Install new gasket (10), oil drain tube (2), and breather tube (9) on turbocharger (1) with two new

lockwashers (8) and screws (7).

5.

Tighten two clamps (6).

FOLLOW-ON TASK: Remove oil inlet tube and refill turbocharger (para. 3-18).

3-30