TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 331 of 1207

TM 9-2320-361-20

Section V. TURBOCHARGER MAINTENANCE

3-17. TURBOCHARGER MAINTENANCE INDEX

PARA.

TITLE

PAGE

NO. NO.

3-18.

Turbocharger Oil Inlet Tube and Adapter Replacement

3-28

3-19.

Turbocharger Oil Drain Tube, Hose, and Adapter Replacement

3-30

3-18. TURBOCHARGER OIL INLET TUBE AND ADAPTER REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Gasket

EQUIPMENT CONDITION

Two lockwashers

Parking brake set (TM 9-2320-361-10).

Cap and plug set (Appendix C, Item 8)

Hood raised and secured (TM 9-2320-361-10).

Antiseize tape (Appendix C, Item 27)

Lubricating oil OE/HDO 30

(Appendix C, Item 19)

CAUTION

Cover or plug all hoses, connections, and openings immediately

after disconnection or component removal to prevent contamina-

tion. Remove all plugs prior to connection.

1. Remove oil inlet tube (3) from elbow (5) and oil inlet adapter (8).

2. Remove elbow (5) from engine (4).

3. Remove two screws (1), lockwashers (2), oil inlet adapter (8), and gasket (7) from turbocharger (6).

Discard lockwashers (2) and gasket (7).

1. Install new gasket (7) and oil inlet adapter (8) on turbocharger (6) with two new lockwashers (2) and

screws (1).

2. Add 2 oz. (59 ml) of new engine oil into oil inlet adapter (8).

3. Install elbow (5) on engine (4).

4. Install oil inlet tube (3) on elbow (5) and oil inlet adapter (8).

3-28