TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 321 of 1207

TM 9-2320-361-20

3-10. CLUTCH CONTROL LINKAGE MAINTENANCE (Contd)

c. Adjustment

1. Loosen nut (3), pull pin (4) to one side of clevis (5), and remove clevis (5) from remote control

lever (1).

2.

3.

4.

5.

If pedal free travel is less than 1.5 in. (3.8 cm), shorten length of rod (2) by tightening clevis (5) on

rod (2).

If pedal free travel is more than 2 in. (5.1 cm), lengthen rod (2) by loosening clevis (5) on rod (2).

Install clevis (5) on remote control lever (1) with pin (4). Press pin (4) into clevis (5) until head of

pin (4) seats against clevis (5).

Recheck pedal free travel (steps 17-18, subtask b.) and tighten nut (3).

FOLLOW-ON TASKS:

Lubricate clutch control linkage (LO 9-2320-209-12-1).

Install hydraulic master cylinder (para 8-10).

Install transmission power takeoff shift linkage (vehicles with transmission PTO

only) (para. 13-20).

Install accelerator pedal, bracket, and rod (para. 3-33).

3-18