TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 327 of 1207

TM 9-2320-361-20

3-15. AIR CLEANER ASSEMBLY MAINTENANCE

This task covers:

a. Removal

c. Installation

b. Inspection

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Four lockwashers

EQUIPMENT CONDITION

Antiseize tape (Appendix C, Item 27)

Parking brake set (TM 9-2320-361-10).

PERSONNEL REQUIRED

Hood raised and secured (TM 9-2320-361-10).

Air intake tube and cap removed (para. 3-13).

Two

Air cleaner element removed (para. 3-14).

1. Disconnect tube (2) from connector (3), and remove connector (3) from air cleaner head (4).

NOTE

Assistant will help with step 2.

2. Remove four nuts (1), screws (6), lockwashers (5), and air cleaner head (4) from firewall (7). Discard

lockwashers (5).

b. Inspection

Inspect air cleaner head (4) for cracks or damage that would allow unfiltered air to enter. Replace air

cleaner head (4) if cracked or damaged.

NOTE

Assistant will help with step 1.

1. Install air cleaner head (4) on firewall (7) with four screws (6), new lockwashers (5), and nuts (1).

NOTE

Male pipe threads must be wrapped with antiseize tape before

installation

2. Install connector (3) on air cleaner head (4).

3. Connect tube (2)

FOLLOW-ON TASKS:

to connector (3).

Install air cleaner element (para. 3-14).

Install air intake tube and cap (para. 3-13).

3-24