TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 462 of 1207

TM 9-2320-361-20

4-33. CIRCUIT BREAKER REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

All

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

a. Removal

NOTE

Vehicle with auxiliary power outlets and personnel heaters have

two additional circuit breakers located next to horn circuit

breaker. Replacement procedures are the same for all circuit

breakers.

Tag wires for installation.

1. Disconnect wires (1) and (5) from circuit breaker (2).

2. Remove two screws (4) and circuit breaker (2) from firewall (3).

b. Installation

FOLLOW-ON TASKS:

Connect battery ground cable (para. 4-48).

Check operation of horn and personnel heater (TM 9-2320-361-10).

4-51