TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 453 of 1207
TM
9-2320-361-20
4-27. LOW AIR BUZZER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
All
REFERENCES (TM)
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Seven lockwashers
EQUIPMENT CONDITION
PERSONNEL REQUIRED
Parking brake set (TM 9-2320-361-10).
Battery ground cable disconnected (para. 4-48).
Two
a. Removal
1. Disconnect wire (13) from low air buzzer (3).
2. Remove two nuts (1) and lockwashers (2) from two stud mounts (4). Discard lockwashers (2).
3. Remove nut (15) and lockwasher (14) from stud mount (11). Discard lockwasher (14).
4. Bend ground strap (12) outward and remove low air buzzer (3) from two stud mounts (4) and stud
mount (11).
NOTE
Assistant will help with steps 5 and 6.
5. Remove two nuts (7), lockwashers (6), and mounting studs (4) from firewall (5). Discard
lockwashers (6).
6. Remove nut (9), lockwasher (8), stud mount (11), ground strap (12), and lockwasher (10) from
firewall (5). Discard lockwashers (8) and (10).
b. Installation
NOTE
Assistant will help with steps 1 and 2.
1. Install stud mount (11) and ground strap (12) on firewall (5) with two new lockwashers (10) and (8)
and nut (9).
2. Install two stud mounts (4) in firewall (5) with two new lockwashers (6) and nuts (7).
3. Install low air buzzer (3) on two stud mounts (4) and stud mount (11).
4. Lift end of ground strap (12) and secure on stud mount (11) with new lockwasher (14) and nut (15).
5. Install two new lockwashers (2) and nuts (1) on stud mounts (4).
6. Connect wire (13) to low air buzzer (3).
4-42
Back to Top
