TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 446 of 1207

TM 9-2320-361-20

4-20. TURN SIGNAL FLASHER REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Four lockwashers

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

1. Disconnect cable connector (4) from turn signal flasher (10).

2. Remove nut (1), lockwasher (2), ground wire (3), screw (7), and lockwasher (6) from turn signal

flasher (10). Discard lockwashers (2) and (6).

3.

Remove nut (12), lockwasher (11), screw (9), lockwasher (8), and turn signal flasher (10) from left

front fender (5). Discard lockwashers (11) and (8).

b. Installation

1.

Install turn signal flasher (10) on left front fender (5) with screw (9), two new lockwashers (8)

and (11), and nut (12).

2. Install screw (7), new lockwasher (6), ground wire (3), new lockwasher (2), and nut (1).

3. Connect cable connector (4) to turn signal flasher (10).

FOLLOW-ON TASKS:

Connect battery ground cable (para. 4-48).

Operate turn signal control to check turn signal flasher (TM 9-2320-361-10).

4-35